Weight -> Strength Best Ratio?

This discussion area is for basic structure building concepts. Not intended for advanced concepts.
*Good Example: Balsa can bend with the addition of boiling water.
*Good Example: Triangle is the strongest shape for most applications of bracing.
*Bad Example: Balsa can hold X pounds under these conditions.
*Bad Example: Use this shape for this application.
Basically I want you to think a design through with the basics instead of someone else thinking through your design for you.
Post Reply
rawrnerozero
Posts: 1
Joined: Mon Apr 08, 2013 11:33 pm

Weight -> Strength Best Ratio?

Post by rawrnerozero » Wed Apr 10, 2013 12:14 am

Hi everyone,
I'm trying to build the most efficient structure for a school project, and i'm wondering what density of wood would yield the best results. Theres no minimum weight, just as long as the efficiency (mass in g held / mass of structure in g) is high, im fine.

thanks
rawrnerozero

smileshine

Post by smileshine » Wed Jul 17, 2013 7:55 pm

Hi, I think I should learn more about this field.

MathWolf
Posts: 3
Joined: Thu Feb 02, 2012 3:23 pm

Post by MathWolf » Wed Jul 24, 2013 7:10 pm

Balsa wood in general has a very high weight to strength ratio. I would suggest, though, to experiment with different densities and figure out for yourself which density is best.

Alexandre25
Posts: 4
Joined: Wed Mar 19, 2014 10:02 am

Post by Alexandre25 » Fri Mar 21, 2014 8:37 am

i think you should decide on a design first as well, so you know what kind of density suits it too

Post Reply

Return to “Bridges & Towers”