Gorilla Glue Quantity:    $ 11.00

Gorilla glue is more costly than other brands of glue, but it is worth the extra cost.  Gorilla Glue takes longer than average to dry, but forms a strong and rigid glue joint.  The glue foams while it dries and penetrates the balsa wood to create a better and stronger hold than average glues.  This glue has a unique quality of using water to dry instead of an absence of water like other glues.

ALTECO ST50 Super Glue Quantity:    $ 4.00

ALTECO ST50 Super Glue dries in seconds and has a very strong bond to the balsa wood's surface.   Simply open the top with a pin, put the thin glue applicator on, and you won't need to put the cap on again.  If it ever plugs up simply remove any excess glue from the tip of the applicator or cut a small section off of the tip.   This glue is excellent for those times when your balsa project breaks and you don't have hours for the glue to dry.

Elmer's Wood Glue Quantity:    $ 3.75

Elmer's Wood Glue is an inexpensive glue that is quite effective for holding balsa wood together.  The glue is available at nearly every store that sells glue.  If however, you do not have access to this type of glue, you can order Elmer's Wood glue for a reasonable price from us.

Titebond III Quantity:    $ 7.00

Titebond III Ultimate Wood Glue is a new type of wood working glue with superior strength and durability. If you are looking for a glue that is waterproof, does not foam like a standard polyurethane glue, and has excellent strength then Titebond III is a good choice.

UFO User-Friendly Odorless Quantity:    $ 19.00

This medium sized bottle of odorless superglue allows you enough time to move the glue joint into position before it dries.  The glue is thicker so you can put it around the glue joint if needed.  There is 1 ounce of glue in this bottle that will last quite a while.  I like to use this glue for end grain applications also -- if you cut a stick in half and try to glue it back together, most superglues will not do so but this glue will.  Fumes from superglues can get very bad but this glue doesn't have a smell.

Super Solvent Super Glue Remover Quantity:    $ 6.50

Super glue remover for cyanoacrylate instant glues. To remove glue from skin: wet a soft cloth such as a paper towel with solvent and apply to glue for 30 seconds. Wipe clean and repeat as necessary. Wash with soap and water. To break existing bonds: apply solvent directly to bond. Repeat at 1 to 2 minute intervals until bond can be separated.

Choose where you would like to visit next then press the "Add to Cart --> Review Items --> Go to Next Page" button at the bottom of this page:
 

Balsa Items	Tools & Accessories
Balsa Leading Edge, Trailing Edge, Ailerons Balsa Dowels End grain Balsa Custom Cut Balsa products Custom Balsa Plywood & Panels Balsa Sheets Balsa Sticks Balsa Blocks Balsa Scraps Balsa Triangles	Laser Cutting Glues Tools Balsa, Glue, & Column Strength Testers
For Structure Building Programs
Specially Weighed 1/16 Square Balsa Sticks Specially Weighed 3/32 Square Balsa Sticks Specially Weighed 1/8 x 1/16 Balsa Sticks Specially Weighed 1/8 Square Balsa Sticks Balsa, Glue, & Column Strength Testers Ask for special B-grade (discolored) practice sticks 1/8x1/8x36, 1/8x1/16x36, 3/32x3/32x36, and 1/16x1/16x36 inch at $0.12 each in the comment box below.
Basswood Items
Basswood Quote
<- Check Out & Pay for Items

Specialized Balsa Wood, LLC
405 8th Street SE, Unit #2
Loveland, CO 80537-6491
(970) 461-WOOD (9663) phone
(970) 461-9662 fax
MST M-F 10-4
Email to Jake Zimmer:
jake@specializedbalsa.com

Message: note that you may add messages at any time and keep adding to the message board. Please refrain from using the following keys as they are not compatible with this website: ' " \